Low Density


Specification SB-217 S-217 S2-217
Bead Size 1.2-1.8mm 0.9-1.3mm 0.7-1.0mm
Density 11~14g/cm³ 12~16g/cm³ 13~18g/cm³
Application Block, Large package Block, Large package Block, Package
Humidity ↓1%
Specific Gravity Approx. 103
Pentane Level 7~ 8%
Polystyrene ↑92%


Preforming

The steam must be saturated at the temperature of 95~105oC. To reach the density we demand with a continuous or batch type performer, sometimes pre-foaming twice is recommended, when we want the density below 10 kg/m3.


Conditioning

Generally, 12-24 hours is recommended, depends on the density. Between the two steps performing, the conditioning time for 4~8 hours is suggested.


Moulding

The machine should be fed with saturated steam with the maximal pressure of 1.3~1.5 bar(about 105~110oC). The steaming time depends on the equipment used as well as the required size and strength of the final product. Therefore, all the machines must be adjusted individually. Individually. In order to reduce the cycling time and to increase the strength of the product, the vacuuming of the equipment is recommended.


Storage

EPS should be stored indoor, and in a cool and good ventilated place. The storage temperature shall be maintained below 20oC. The lower, the better.


*Once bag is opened, shall be used as soon as possible to maintain freshness, "FIRST IN FIRST OUT"

Related Products

EPS Package and Storage

EPS Package and Storage

BPO

BPO

Low Pantane

Low Pantane

Fish Box-118

Fish Box-118

Fast Cycle-333

Fast Cycle-333